安本靜電噴粉機EPG-2072A
該型設備具備了當今世界上用于噴涂設備的全部先進手段：重要極輕的噴槍（僅530克），內置可拆卸的高壓模塊獨到的兩路的中央氣的設計，兩路流量計顯示的供粉狀態，全不銹鋼的供粉筒及設計緊湊的控制器將EPG-2099推至手動裝備的*。
This type of device equipped with spraying equipment used in todays world, all of the advanced methods: important extremely light gun (only 530 grams), built-in detachable two-way high-voltage module unique design of the central air, two-way flow meter shown for the powder state, all stainless steel barrel and design for the powder compact controller EPG-2099 to manually push the top-level equipment.

粉末手動噴槍有三種不同口徑的分散粉末的導流體，3.5m長的輸粉管和連接控制器電纜及中央氣管。
manual powder spray gun There are three different calibers scattered powder deflector body, 3.5m long pink tubes and connecting transmission control cables and the central trachea
全不銹鋼粉桶，安全蓋，底層流化床。
full stainless steel powder barrel, safety cap, the bottom fluidized bed.
堅固，靈便的推車可迅速改變噴涂位置。
sturdy, handy rack can quickly change the spraying position.
技術提示：
Tech Tips：
高壓模塊緊鄰噴嘴電壓損耗低，可換式高壓組件給維修帶來了方便。
high-voltage module adjacent to the nozzle voltage low loss, high-pressure components can be changed to bring the convenience of maintenance.
兩路中央空氣設計，使電極針導流體不再積粉，加強了放電效果，提高了上粉率，旋轉霧化氣流則大大提高了涂層質量，兩路流量計顯示供粉狀態直觀，合理。
central air two-way design, the electrode needle deflector body is no longer the plot powder, increased discharge effect, increasing the extraction rate, rotary atomization air is greatly improved coating quality, 2 Lu meter displays the status for the powder intuitive and reasonable.
由于選用了大流量氣動原件，故在較小氣流壓力下，仍能達到高出粉量。
The device is equipped with high-quality pneumatic components, and therefore less air pressure, could meet the large amount of powder effect.
全不銹鋼供粉筒，不用工具即可方便拆卸全部零件，清洗便利快捷。
stainless steel barrels, without tools can facilitate the demolition of all the parts, cleaning convenient and speedy.